Installation

The program is single python script so that you just clone the repository in your local machine by git clone.

git clone https://github.com/git-ogawa/usbcamGUI.git

However, you need install the dependent packages. If you haven’t installed the packages in requirements yet, can install them with pip

pip install git+https://github.com/git-ogawa/usbcamGUI

If you use the Debian-based OS, it also needs v4l2 so install with apt. If windows, don’t need to install.

sudo apt install v4l-util

Installation on Raspberry Pi

The error message will be shown by executing pip install git+https://github.com/git-ogawa/usbcamGUI

No matching distribution found for PySide2>=5.12.0 (from usbcamGUI==1.0.0)`

Apparently Pyside2 cannot be installed with pip on Raspberry pi OS, so install with apt by the following command

sudo apt install python3-pyside2.qt3dcore python3-pyside2.qt3dinput python3-pyside2.qt3dlogic python3-pyside2.qt3drender python3-pyside2.qtcharts python3-pyside2.qtconcurrent python3-pyside2.qtcore python3-pyside2.qtgui python3-pyside2.qthelp python3-pyside2.qtlocation python3-pyside2.qtmultimedia python3-pyside2.qtmultimediawidgets python3-pyside2.qtnetwork python3-pyside2.qtopengl python3-pyside2.qtpositioning python3-pyside2.qtprintsupport python3-pyside2.qtqml python3-pyside2.qtquick python3-pyside2.qtquickwidgets python3-pyside2.qtscript python3-pyside2.qtscripttools python3-pyside2.qtsensors python3-pyside2.qtsql python3-pyside2.qtsvg python3-pyside2.qttest python3-pyside2.qttexttospeech python3-pyside2.qtuitools python3-pyside2.qtwebchannel python3-pyside2.qtwebsockets python3-pyside2.qtwidgets python3-pyside2.qtx11extras python3-pyside2.qtxml python3-pyside2.qtxmlpatterns python3-pyside2uic

Requirements

The propgram requires python >= 3.6. The list of dependent packages is below.

  • numpy

  • pillow

  • PySide2

  • Opencv >= 4.1.0

Support

OS

The Debian-based distributions are supported. I verified with OS below.

  • ubuntu 18.04 LTS

  • Raspberry Pi OS (32bit)

  • Windows 10 (partially supported, experimantal)

Camera

UVC (USB Video Class) Cameras probably are supported. I verified with cameras listed below.

  • Logicool C270

Raspberry Pi Camera module V2 on Raspberry Pi is also supported because it can be treated as a USB device with opencv.